Steve Morris of Canadian Woodworking Magazine Tests the Strength of Multiple Dowel Joints Versus Mortise and Tenon Joints in Oak, and Biscuit Joints in Sheet Good Material. Click the Following Link for the Full Article:
How Strong is a Dowel Joint? – Canadian Woodworking Magazine
Dowelmax Multiple Dowel Joints Tested Against Domino Joints:
In a strength test video from June 2017, Jim reviews the accuracy of Dowelmax and Domino joints, uses an identical procedure to glue and clamp both types, and then tests each of them in a hydraulic press.
Video: Wood Joint Strength Face Off: Dowelmax Vs Domino — Dowelmax YouTube channel (4.62K subscribers)
For the article below, we sent our strength test apparatus to a prominent magazine in England for independent strength testing of the wood joint types shown in our tests. We had no control over the procedures, or the outcome, and the results confirm the findings of our own tests.
Embedded document (Cloudup): "F C219 P27 31 Construction Tech Joint success" — https://cloudup.com/izgl678IQj5
The second video is a strength test comparison of wood joints made using the following systems: (1) pocket hole, (2) biscuit, (3) mortise & tenon, (4) domino and (5) multiple dowel.
Video: Wood Joint Strength Test by Dowelmax Part 1 - Pocket Hole Vs. Biscuit Vs. Domino Vs. Multiple Dowel — Dowelmax YouTube channel
The third video is in response to a wood joint strength test published in a prominent woodworking magazine where a M&T joint with two inch tenon penetration was compared to a multiple dowel joint with one inch dowel penetration.
For the article below, we sent our strength test apparatus to a prominent magazine in England for independent strength testing of the wood joint types shown in our tests.
We had no control over the procedures or the outcome, and the results were very interesting.